5HP SPL Air Compressor Electric Motor 1 Phase 3450 RPM 56 Frame 5/8" Shaft ODP
This page is affiliate-supported. Prices and availability can change after the last marketplace refresh.
About this product
This Bips 5HP SPL electric motor is designed for single-phase air compressor applications, featuring a 3450 RPM base speed and a 5/8-inch shaft diameter. Operating on 208V or 230V AC, it comes in a 56 frame with an Open Drip-Proof (ODP) enclosure, suitable for environments where direct water spray is not a concern. The motor, constructed with a rolled steel shell, has a net weight of 39.46 lb and includes a protector for enhanced durability.
Our take
If you're looking to replace or upgrade an air compressor motor, this 5HP SPL unit from Bips offers solid specifications. The 3450 RPM is standard for many compressors, and the single-phase operation means it's compatible with typical workshop power. I appreciate the included protector, adding a layer of safety. The ODP enclosure is a consideration – it's fine for dry, indoor use, but for any area with potential moisture, you'd want something more sealed. The rolled steel shell suggests good basic durability, and at under 40 lbs, it's manageable for installation. Overall, it's a straightforward replacement motor.
Pros & Cons
Pros
- 5 HP for demanding air compressor tasks
- Single-phase 208V/230V operation
- 3450 RPM base speed
- Integrated motor protector
- Rolled steel shell construction
Cons
- ODP enclosure not for wet environments
- Non-reversible motor design
- Insulation Class B (Max 266°F)
Specifications
- Brand Bips
- MPN 108065-bes
- Rated Load (HP) 5
- Current Type AC
- Nominal Rated Input Voltage 208 V, 230 V
- AC Phase Single Phase
Show all 25 specifications
- Special Motor Construction
- Spindle Motor
- Service Factor
- SPL
- Shaft Diameter
- 5/8 in
- Shaft length
- 1.875 in
- Base RPM
- 3450 RPM
- IEC Frame Size
- 56
- AC Frequency Rating
- 60 Hz
- AC Motor Type
- Induction/Asynchronous
- Reversible/Non-Reversible
- Non-Reversible
- Enclosure Type
- ODP (Open Drip-Proof)
- Net Weight
- 39.46 lb
- Mounting Type
- Base-Mounted
- Protector
- Yes
- IP Rating
- IP23
- Insulation Class
- B (Max 266°F)
- Model
- Air Compressor
- Amps
- 16.0 A, 15.0 A
- Gross weight
- 45.19 lb
- Housing Material
- Rolled steel shell
